From the FAQ on AlienBees web site...
"Q: Is the 150-watt quartz lamp the brightest modeling lamp that I can use?
A: 150 watts is the maximum power recommended for your modeling lamp. This allows the cooling fan to maintain low internal temperatures. It is possible to use a 250-watt quartz lamp if particular care is taken. As a 250-watt bulb produces more heat, you should not operate your flash unit for extended periods of time with this bulb in place. You will need to be cautious when using this bulb, ensuring that there is adequate airflow. Accessories that close around the faceplate (such as a softbox, an octabox, a honeycomb grid or a snoot) may restrict the airflow and trap heat. In these conditions, a 250-watt lamp should not be used. Failure to follow these precautions could cause damage that may not be covered by our warranty."
So, you can use 250w modeling lights, but be very careful with them because of the extra heat they put out.
I've been wanting to give this a try, but I haven't got around to it yet. I want to find the 250w quartz bulbs at a good price first.
What I would really like is a small wireless remote control that would turn the room lights on and off. Even better would be to have the room lights slaved to the modeling lights. If the room lights would turn on and off simultaneously with the modeling lights, that would be awesome. Is there an electrical engineer in the house? :D
Message edited by author 2006-10-14 14:29:28.
|
